Pages Menu

Posted by on Apr 4, 2015 in Uncategorized | 0 comments

Dispose Of Your Household Pesticides The Right Away

There are many hazardous products in your home, but few are as bad as a household pesticide. If you decide that it is time for your family to turn to safer pest control methods, such as the use of boric acid, you will still need to figure out what you will do with your old pesticides.

Don’t Pour the Pesticides Down the Drain

The worst thing to do is to pour your pesticides down the drain. Doing so will place a lot of strain on your municipality and if the pesticides end up in the ground water or in a nearby stream, you will harm wildlife and may also contaminate the drinking water. For example, Dimpylate can impair the nervous system.

Look Up Local Regulations Regarding the Pesticides

First, look up the pesticide to make sure that it is still legal for the pesticide to be stored. Many pesticides are banned and must then be disposed of, so you might face a fine if you do not take prompt steps toward eliminating the pesticides.

Read the Product Label

Begin by checking the product label. Often, pesticides will have instructions on how you are allowed to dispose of them. For example, you might need to deactivate the chemical by adding another chemical that neutralizes it. Often times, there is a number you can call to put you in touch with a nearby pesticide disposal location. Always contact a local resource because state regulations can often be stricter than federal regulations in regards to hazardous waste management

Dispose of the Pesticides Following Instructions

If you are given permission to simply pour out the pesticides, make sure that you wear protective gloves while doing so. Also, wear protective gloves when rinsing out the pesticide container. Do not reuse the container for any other purpose. The label might also ask you to dilute the pesticide before you dispose of it. Follow the exact instructions for doing so. Usually, if the container is completely empty, you are allowed to simply place it in the trash.

Contact the Manufacturer

Contact the company that produces the pesticides to find out if they have a program where they will take back the banned pesticide. They will often be better equipped to dispose of the pesticide in an ecologically sound manner.

Clean Your Equipment

You will also need to clean the equipment that you used to apply the pesticides. It is best to clean the equipment at the site where the pesticides were last applied since contamination will not be a concern there. Clean not only the tank, but all of the tubes and nozzles connected to the equipment.  

Read More

Posted by on Mar 2, 2015 in Uncategorized | 0 comments

Metal Detecting: Innovation Hits The Scrap Yard To Make Separation Easier

While steel and iron are easy to separate from scrap piles using magnets, other metals such as titanium, copper and aluminum are harder to sort. But scientists and researchers have come to the rescue, developing new techniques for sorting solids and liquids and cutting the time and cost involved in separating scrap materials.

University makes machine to accurately sort light metals.

To help keep unsorted metals out of landfills, researchers at the University of Utah have developed a mechanical metals separator that’s accurate and cost-effective.

Every metal has a reaction to a strong magnetic force, generating a magnetic current unique to the metal. These frequencies have the energy to move metal pieces. By tweaking a magnet, researchers can get different metals to move in graduated amounts, causing each metal to fall into its correct bin.

The setup requires only a large magnet and a frequency controller, meaning it’s cheap enough that most scrap yards will recoup the cost of the unit within a year. So far, however, the technology only works with small pellets. But it’s a great breakthrough in sorting lighter metals.

Scientists use two-step process to extract rare-earth metals.

There are numerous rare-earth metals that can be recycled from old computers, phones and other electronic equipment. The problem is, there’s no simple, cheap way to remove and sort these materials from electronic waste.

Scientists at the Critical Materials Institute, part of the US Department of Energy’s Ames Laboratory, have created a two-step process for extracting the valuable metals.

The first step involves melting the scrap with magnesium. Lighter rare-earth metals are drawn to the magnesium and are later recovered from it.

The second step involves melting the material with another substance to extract the heavier metals. The process should lead to faster, more economical recovery and recycling of rare-earth metals.

Scrap metal compactor helps machine shops separate fluids.

Machine shops generate a lot of metal waste, from turnings to chips. Some of these trimmed metal pieces or worn components may be coated with oils, coolants or cutting fluids.

Cleaning the fluids from metal waste makes recycling it easier, but there’s also a cost savings in recycling the fluids.

One new machine separates these fluids from the metal while also compacting metals for transport. Machine shops can fill them up and have the waste transported to the scrap yard, knowing they’re being environmentally friendly by recycling the fluids as well.

It’s good to know that scientists and researchers are constantly learning and discovering new ways to help us sort metals and keep them out of our landfills and waterways. The future holds a lot of promise for green, sustainable metal scrapping.

For more information, contact Get Green Recycling Co. or a similar company.

Read More

Posted by on Feb 4, 2015 in Uncategorized | 0 comments

Asbestos Removal & Renovating A Home: What Must Be Done Before You Start

When remodeling, it is vital for your home to be inspected by an environmental specialist before you remove any materials that may possibly contain asbestos. Removing materials containing asbestos will put you at risk for getting cancer, which can happen if asbestos is inhaled. Find out how materials with asbestos should be removed and what a professional will charge to do it for you.

What Should Be Done Before Removing Materials That May Contain Asbestos?

An environmental specialist will have to visit your home to inspect the materials that you are removing for the renovation project. Some of the materials that sometimes contain asbestos include drywall, floor tiles and insulation. You must get permission from the city agency in charge of environmental quality before you can do anything, and they will automatically send a specialist to your home when you alert them of your project.

If there is asbestos in the materials being removed, you may have to get a permit to carry out the task. However, small amounts of asbestos can usually be removed without a permit. It is also possible for the environmental specialist to not allow you to remove any materials on your own if friable asbestos is found in your home. The reason is due to friable asbestos being highly harmful and placing your health at risk for mesothelioma. It is important for materials containing friable asbestos to be removed by a trained professional to keep you safe.

How Much Does Professional Asbestos Removal Cost?

When your home is inspected by an environmental specialist, he or she will let you know every area that contains asbestos. The cost for removal will depend on where the asbestos is located and how much is being removed. You can expect a professional to charge you an average of $1,500 to $30,000 to get rid of the asbestos in your home. No matter how much asbestos removal ends up costing, it is in your best interest to get if removed as soon as possible.

Renovating a home can be exciting and having to wait for an asbestos inspection can be frustrating. However, you must not move forward until you have been granted permission to remove certain materials to avoid harming your health and releasing asbestos into the environment. Contact an asbestos removal company like Alm Abatements to make sure harmful materials are moved the right way! In many areas, DIY removal is actually illegal, so be sure to work with experts to keep yourself and your wallet safe.

Read More

Posted by on Jan 14, 2015 in Uncategorized | 0 comments

Your House Is Full Of Recyclables, Not Junk

When planning a major housecleaning project, don’t assume that everything you don’t want is junk to be thrown away. Your home is full of items that can be reconditioned or recycled. Do some research on local recycling centers to find out which ones can take the following items off of your hands.

Large Appliances

You may have an old refrigerator in the garage or clothes washer in the basement that you’ve been meaning to throw away. If they are operational at all, an appliance refurbishing company will take them to recondition and sell. Many will offer to pick them up for free. If they don’t work at all, you can still get rid of them at a scrap metal company. Small appliances such as toasters and microwaves are often not recyclable. Call around to small independent repair companies and you may find someone who will take them and try to get them working again to resell.

Kitchen and Bathroom Fixtures

Metal sinks, tubs and shower stalls can be given to scrap metal companies. If you have an old porcelain tub, sink or toilet that is not chipped or stained, they can be recycled. Fiberglass showers and bathtubs cannot be recycled, but you can recycle the glass doors on a shower.

Flooring Scraps

Some of the materials left over from a remodeling project can be recycled. A carpet that does not have stains or water damaged can be recycled but the pad under the carpet needs to be thrown away. Ceramic tile can be recycled if it can be salvaged in large sections. Granite and marble tiles can be reused if they aren’t cracked. Local recycling centers that handle construction waste may take broken tiles to be crushed for fill.

Other Home Remodeling Waste

Roof shingles made of asphalt can be recycled into roadway repair material. Wooden shingles can be recycled as mulch. Any large pieces of wood left from a roof or attic project can also be recycled. Old plumbing materials such as steel and copper pipes are recyclable. All plastic drain and water pipes must be discarded. Steel and copper electrical wires can also go into the recycling bin. Some exterior remodeling materials can be recycled such as cement blocks, clay bricks, and stones from a walking path or retaining wall.

Yard and Garden Materials

Donate excess bags of topsoil, peat moss or fertilizer to a local community garden along with any gardening tools you no longer need. They can also make use of any flower pots or seed trays.

Your home is full of items and material that can be reused or recycled. Don’t just fill up a dumpster the next time you do a major house cleaning project. Sort through the house for things that still have some life in them. Contact a recycling center like American Northwest Recycling for more information.

Read More

Posted by on Dec 10, 2014 in Uncategorized | 0 comments

Moving Out? Keep These 4 Things In Mind When You Rent A Dumpster

When you plan to move to a new house, a dumpster rental can be a great way to dispose of items and furniture you will not need in your new house. However, there are a few things to keep in mind so that the process goes smoothly. Here are a few things to keep in mind when you rent a dumpster.

Find Out If You Need a Permit

If you get a dumpster without the proper permits in some towns, you will have to pay hefty fines. Save yourself some trouble by heading to your local building permit office to find out if you need a permit for your dumpster.

Your town may not be the only authority you need to check with. If you are part of a homeowner’s association, you might not be permitted to have a dumpster unless you get permission from the association board.

Make a Plan

Once you’ve called a dumpster rental company and know when the dumpster will arrive, you have to make a plan about how you will get the job done.

Since you are moving, if you already have the keys to your new place, think about moving belongings to the new place before the dumpster arrives. That way, when the dumpster gets there, everything left in the house can go in the dumpster.

If you don’t yet have a place to move your things, try gathering the things you plan to throw away. Put them as near to the door as you can, so when the dumpster arrives, you need not travel far to get to the things you want to get rid of.

Fill the Dumpster Properly

You may not have thought very much about how to fill the dumpster; you might plan to toss things in there. However, when you fill the dumpster in an efficient manner, you will be able to fit more things inside. That may save you money, because you won’t have to get another dumpster in the future.

How do you fill the dumpster properly? To start, break down as much as you can. Instead of tossing empty cardboard boxes into the dumpster for instance, break them down until they are as flat as possible. If you have furniture you can disassemble into smaller pieces, do so to make more space in the dumpster.

Save plastic garbage bags until after you’ve put in everything else you want to dispose of. That way, you can stick the bags into empty spaces.

Keep the above tips in mind, and your dumpster rental experience will be a success. You can move with only the things you want to take, and the dumpster rental company can take the rest.

Read More

Posted by on Dec 4, 2014 in Uncategorized | 0 comments

Inexpensive Ways Of Keeping Your Gas Consumption Low

Do you want to minimize your propane gas usage during the cold season? There are many ways of doing this, but some of them aren’t exactly cheap. Here are a few inexpensive measures that you can try:

Fill the Holes Around Electrical Boxes

Do your exterior boxes have some electrical boxes in them? If they do, then you are probably losing some heated air around those places. In most houses, the boxes do not have proper insulation around and behind them, which leads to considerable drafts.

Luckily, this is something you can easily fix. You just need to remove the cover plates in the boxes and fill the small gaps with acrylic latex caulk. Next, cover the outlet with a foam gasket and then replace the cover plate. If you handle the work yourself, then you will just spend the few dollars for buying foam.

Seal the Gaps Around Wall Extrusions

Apart from electrical boxes, extrusions in your walls may also have some gaps around them. Plumbing fixtures such as gas lines and water pipes, as well as electrical cables, are the common causes of these gaps. During installation, contractors use different kinds of caulks to fill them, but these dry off and let in cool air from outside. If that is the case, then you should get some expanding foam to fill the holes.

Cover the Windows Panes

Windows are some of the most common routes through which heat loss occur. Replacing your windows with more energy efficient ones would be ideal, but that is going to cost you considerable money. Assuming that there are no gaps around the frame, a cheaper alternative is to cover the windows with a film of clear plastic. Do the same for other openings covered by large glasses, for example, sliding patio doors. They are inexpensive, and there are even scratch-resistant varieties to maintain your window aesthetics.

Take Care of the Space Around the Chimney

Lastly, if you have a chimney, then you may also be losing some warm air through the chimney, thereby causing your furnace to work extra hard.  Don’t forget that closing the chimney flue doesn’t make the area airtight; some warm air will still escape.

Have you heard of a chimney balloon? This is an inflatable balloon that blocks the airflow whenever you are not using the chimney. You are supposed to take it down while using the chimney, but even if you don’t, they are designed to self-deflate when there is a fire in the chimney.

All these measures are meant to keep cold air outside the house, and to keep the heated air inside. If you don’t do this, then your furnace will consume more gas to heat up the extra air.

For more information about propane and propane tanks, contact Anderson’s Propane or a similar company.


Read More
Page 2 of 3123